Category Blog

Why tooling costs what it does, why a colour change costs a fraction of it, and how a forty-room property gets a look nobody else has.

Screen, pad, laser, hot stamp or in-mould. What each does to a cast polyresin surface, what it costs, and what to send before the sample stage.

One finish, varied piece counts. How to keep four room categories looking like one property, and why mixing finishes falls apart down a corridor.

Kettle trays, vanity trays and slipper trays sized by what goes on them. Lip height, handle clearance and the counter depth that decides the rest.

Where corners get cut between pouring and demoulding, how to tell a factory from a trading company, and what to ask so the answer cannot be faked.

Luxury on a cast piece is edge radius, weight, coating depth and a clean parting line. The specific things a buyer can check by hand before approving.

Why a standard room takes six pieces and a suite takes twelve, which items are non-negotiable, and where the cost breaks in a guest room set.

Trays chip, lids crack, bin rims polish. The failure order in a guest room, read off reorder sheets, and the design fixes that prevent each one.

How polyresin, solid resin and ceramic really compare in a hotel bathroom: cleaning chemicals, drops, colour range, reorder matching and cost.

Polyresin explained from the casting floor: filler ratios, cure time, pressed vs sprayed finishes, and where the material is the wrong choice.